Bits › 8.0mm tapered ball nose bit › softwood
8.0mm tapered ball nose bit: softwood
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine
Same material, other bits: all softwood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools TBN-05M8-DLC | hobby-ultralight | 12000 | 59.6 | 0.00124 | source |
| High Country Tools TBN-75M8-DLC | hobby-ultralight | 12000 | 59.6 | 0.00124 | source |
| High Country Tools TBN-05M8-DLC | hobby-light | 16000 | 123.6 | 0.00193 | source |
| High Country Tools TBN-75M8-DLC | hobby-light | 16000 | 123.6 | 0.00193 | source |
| High Country Tools TBN-05M8-DLC | hobby-rigid | 16000 | 176.6 | 0.00276 | source |
| High Country Tools TBN-75M8-DLC | hobby-rigid | 16000 | 176.6 | 0.00276 | source |
| High Country Tools TBN-05M8-DLC | business | 16000 | 247.3 | 0.00386 | source |
| High Country Tools TBN-75M8-DLC | business | 16000 | 247.3 | 0.00386 | source |
| High Country Tools TBN-05M8-DLC | industrial | 16000 | 300.3 | 0.00469 | source |
| High Country Tools TBN-75M8-DLC | industrial | 16000 | 300.3 | 0.00469 | source |
FAQ
What feeds and speeds for a 8.0mm tapered ball nose bit in softwood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00124 in per tooth and a feed of 59.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in softwood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00193 in per tooth and a feed of 123.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in softwood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00276 in per tooth and a feed of 176.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in softwood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00386 in per tooth and a feed of 247.3 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in softwood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00469 in per tooth and a feed of 300.3 IPM (2 sourced rows). Start low and test in scrap.