Bits › 8.0mm tapered ball nose bit › dense hardwood (maple, oak)
8.0mm tapered ball nose bit: dense hardwood (maple, oak)
Other materials: acrylic · baltic birch plywood · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all dense hardwood (maple, oak) settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools TBN-05M8-DLC | hobby-ultralight | 12000 | 46.7 | 0.00097 | source |
| High Country Tools TBN-75M8-DLC | hobby-ultralight | 12000 | 46.7 | 0.00097 | source |
| High Country Tools TBN-05M8-DLC | hobby-light | 16000 | 96.8 | 0.00151 | source |
| High Country Tools TBN-75M8-DLC | hobby-light | 16000 | 96.8 | 0.00151 | source |
| High Country Tools TBN-05M8-DLC | hobby-rigid | 16000 | 138.2 | 0.00216 | source |
| High Country Tools TBN-75M8-DLC | hobby-rigid | 16000 | 138.2 | 0.00216 | source |
| High Country Tools TBN-05M8-DLC | business | 16000 | 193.5 | 0.00302 | source |
| High Country Tools TBN-75M8-DLC | business | 16000 | 193.5 | 0.00302 | source |
| High Country Tools TBN-05M8-DLC | industrial | 16000 | 235 | 0.00367 | source |
| High Country Tools TBN-75M8-DLC | industrial | 16000 | 235 | 0.00367 | source |
FAQ
What feeds and speeds for a 8.0mm tapered ball nose bit in dense hardwood (maple, oak) on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00097 in per tooth and a feed of 46.7 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in dense hardwood (maple, oak) on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00151 in per tooth and a feed of 96.8 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in dense hardwood (maple, oak) on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00216 in per tooth and a feed of 138.2 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in dense hardwood (maple, oak) on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00302 in per tooth and a feed of 193.5 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in dense hardwood (maple, oak) on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00367 in per tooth and a feed of 235 IPM (2 sourced rows). Start low and test in scrap.