Bits › 8.0mm tapered ball nose bit › hdpe / uhmw
8.0mm tapered ball nose bit: hdpe / uhmw
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · mdf · melamine · softwood
Same material, other bits: all hdpe / uhmw settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools TBN-05M8-DLC | hobby-ultralight | 11500 | 69.6 | 0.00151 | source |
| High Country Tools TBN-75M8-DLC | hobby-ultralight | 11500 | 69.6 | 0.00151 | source |
| High Country Tools TBN-05M8-DLC | hobby-light | 11500 | 108.2 | 0.00235 | source |
| High Country Tools TBN-75M8-DLC | hobby-light | 11500 | 108.2 | 0.00235 | source |
| High Country Tools TBN-05M8-DLC | hobby-rigid | 11500 | 154.6 | 0.00336 | source |
| High Country Tools TBN-75M8-DLC | hobby-rigid | 11500 | 154.6 | 0.00336 | source |
| High Country Tools TBN-05M8-DLC | business | 11500 | 216.4 | 0.0047 | source |
| High Country Tools TBN-75M8-DLC | business | 11500 | 216.4 | 0.0047 | source |
| High Country Tools TBN-05M8-DLC | industrial | 11500 | 262.8 | 0.00571 | source |
| High Country Tools TBN-75M8-DLC | industrial | 11500 | 262.8 | 0.00571 | source |
FAQ
What feeds and speeds for a 8.0mm tapered ball nose bit in hdpe / uhmw on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00151 in per tooth and a feed of 69.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in hdpe / uhmw on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00235 in per tooth and a feed of 108.2 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in hdpe / uhmw on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00336 in per tooth and a feed of 154.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in hdpe / uhmw on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0047 in per tooth and a feed of 216.4 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in hdpe / uhmw on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00571 in per tooth and a feed of 262.8 IPM (2 sourced rows). Start low and test in scrap.