Bits › 8.0mm tapered ball nose bit › hardwood
8.0mm tapered ball nose bit: hardwood
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all hardwood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools TBN-05M8-DLC | hobby-ultralight | 12000 | 51.8 | 0.00108 | source |
| High Country Tools TBN-75M8-DLC | hobby-ultralight | 12000 | 51.8 | 0.00108 | source |
| High Country Tools TBN-05M8-DLC | hobby-light | 16000 | 107.5 | 0.00168 | source |
| High Country Tools TBN-75M8-DLC | hobby-light | 16000 | 107.5 | 0.00168 | source |
| High Country Tools TBN-05M8-DLC | hobby-rigid | 16000 | 153.6 | 0.0024 | source |
| High Country Tools TBN-75M8-DLC | hobby-rigid | 16000 | 153.6 | 0.0024 | source |
| High Country Tools TBN-05M8-DLC | business | 16000 | 215 | 0.00336 | source |
| High Country Tools TBN-75M8-DLC | business | 16000 | 215 | 0.00336 | source |
| High Country Tools TBN-05M8-DLC | industrial | 16000 | 261.1 | 0.00408 | source |
| High Country Tools TBN-75M8-DLC | industrial | 16000 | 261.1 | 0.00408 | source |
FAQ
What feeds and speeds for a 8.0mm tapered ball nose bit in hardwood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00108 in per tooth and a feed of 51.8 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in hardwood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00168 in per tooth and a feed of 107.5 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in hardwood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0024 in per tooth and a feed of 153.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in hardwood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00336 in per tooth and a feed of 215 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in hardwood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00408 in per tooth and a feed of 261.1 IPM (2 sourced rows). Start low and test in scrap.