Bits › 3/16" Onsrud series (hard plywood)
3/16" Onsrud series (hard plywood) feeds and speeds
7 sourced settings from Onsrud. Published chip loads range from 0.003 to 0.014 in per tooth. Pick your material:
wood / mdf (7)
| Manufacturer / bit | Material | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|---|
| Onsrud Series | Hard plywood | industrial | – | – | 0.003–0.006 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.004–0.006 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.006–0.008 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.004–0.006 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.006–0.008 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.012–0.014 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.003–0.005 | source |
FAQ
What feeds and speeds for a 3/16" Onsrud series (hard plywood) on a industrial CNC router?
Published manufacturer data (Onsrud) gives a chip load of 0.003–0.014 in per tooth and a feed of – IPM (7 sourced rows). Start low and test in scrap.