Bits › 1/8" upcut end mill › hdpe / uhmw
1/8" upcut end mill: hdpe / uhmw
Other materials: abs · acrylic · aluminum · baltic birch plywood · cast acrylic · dense hardwood (maple, oak) · epoxy resin · extruded acrylic · hardwood · mdf · melamine · polycarbonate (lexan) · softwood
Same material, other bits: all hdpe / uhmw settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools END-18U-DLC | hobby-ultralight | 11500 | 24.2 | 0.00105 | source |
| High Country Tools END-18U18-DLC | hobby-ultralight | 11500 | 24.2 | 0.00105 | source |
| High Country Tools END-18U-DLC | hobby-light | 11500 | 37.6 | 0.00163 | source |
| High Country Tools END-18U18-DLC | hobby-light | 11500 | 37.6 | 0.00163 | source |
| High Country Tools END-18U-DLC | hobby-rigid | 11500 | 53.7 | 0.00233 | source |
| High Country Tools END-18U18-DLC | hobby-rigid | 11500 | 53.7 | 0.00233 | source |
| High Country Tools END-18U-DLC | business | 11500 | 75.1 | 0.00327 | source |
| High Country Tools END-18U18-DLC | business | 11500 | 75.1 | 0.00327 | source |
| High Country Tools END-18U-DLC | industrial | 11500 | 91.3 | 0.00397 | source |
| High Country Tools END-18U18-DLC | industrial | 11500 | 91.3 | 0.00397 | source |
FAQ
What feeds and speeds for a 1/8" upcut end mill in hdpe / uhmw on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00105 in per tooth and a feed of 24.2 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in hdpe / uhmw on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00163 in per tooth and a feed of 37.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in hdpe / uhmw on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00233 in per tooth and a feed of 53.7 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in hdpe / uhmw on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00327 in per tooth and a feed of 75.1 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in hdpe / uhmw on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00397 in per tooth and a feed of 91.3 IPM (2 sourced rows). Start low and test in scrap.