Bits › 1/8" upcut end mill › epoxy resin
1/8" upcut end mill: epoxy resin
Other materials: abs · acrylic · aluminum · baltic birch plywood · cast acrylic · dense hardwood (maple, oak) · extruded acrylic · hardwood · hdpe / uhmw · mdf · melamine · polycarbonate (lexan) · softwood
Same material, other bits: all epoxy resin settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools END-18U-DLC | hobby-ultralight | 12000 | 14.4 | 0.0006 | source |
| High Country Tools END-18U18-DLC | hobby-ultralight | 12000 | 14.4 | 0.0006 | source |
| High Country Tools END-18U-DLC | hobby-light | 14500 | 27.1 | 0.00093 | source |
| High Country Tools END-18U18-DLC | hobby-light | 14500 | 27.1 | 0.00093 | source |
| High Country Tools END-18U-DLC | hobby-rigid | 14500 | 38.7 | 0.00133 | source |
| High Country Tools END-18U18-DLC | hobby-rigid | 14500 | 38.7 | 0.00133 | source |
| High Country Tools END-18U-DLC | business | 14500 | 54.1 | 0.00187 | source |
| High Country Tools END-18U18-DLC | business | 14500 | 54.1 | 0.00187 | source |
| High Country Tools END-18U-DLC | industrial | 14500 | 65.7 | 0.00227 | source |
| High Country Tools END-18U18-DLC | industrial | 14500 | 65.7 | 0.00227 | source |
FAQ
What feeds and speeds for a 1/8" upcut end mill in epoxy resin on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0006 in per tooth and a feed of 14.4 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in epoxy resin on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00093 in per tooth and a feed of 27.1 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in epoxy resin on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00133 in per tooth and a feed of 38.7 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in epoxy resin on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00187 in per tooth and a feed of 54.1 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in epoxy resin on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00227 in per tooth and a feed of 65.7 IPM (2 sourced rows). Start low and test in scrap.