Bits › 1/4" 30-degree V-bit › dense hardwood (maple, oak)
1/4" 30-degree V-bit: dense hardwood (maple, oak)
Other materials: acrylic · aluminum · baltic birch plywood · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all dense hardwood (maple, oak) settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools VBI-30-DLC | hobby-ultralight | 12000 | 31.9 | 0.00089 | source |
| High Country Tools VBI-30-DLC | hobby-light | 18000 | 74.5 | 0.00138 | source |
| High Country Tools VBI-30-DLC | hobby-rigid | 18000 | 106.4 | 0.00197 | source |
| High Country Tools VBI-30-DLC | business | 18000 | 148.9 | 0.00276 | source |
| High Country Tools VBI-30-DLC | industrial | 18000 | 180.9 | 0.00335 | source |
FAQ
What feeds and speeds for a 1/4" 30-degree V-bit in dense hardwood (maple, oak) on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00089 in per tooth and a feed of 31.9 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" 30-degree V-bit in dense hardwood (maple, oak) on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00138 in per tooth and a feed of 74.5 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" 30-degree V-bit in dense hardwood (maple, oak) on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00197 in per tooth and a feed of 106.4 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" 30-degree V-bit in dense hardwood (maple, oak) on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00276 in per tooth and a feed of 148.9 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" 30-degree V-bit in dense hardwood (maple, oak) on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00335 in per tooth and a feed of 180.9 IPM (1 sourced row). Start low and test in scrap.