Bits › 1/4" 30-degree V-bit › baltic birch plywood
1/4" 30-degree V-bit: baltic birch plywood
Other materials: acrylic · aluminum · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all baltic birch plywood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools VBI-30-DLC | hobby-ultralight | 12000 | 33.7 | 0.00094 | source |
| High Country Tools VBI-30-DLC | hobby-light | 18000 | 78.6 | 0.00146 | source |
| High Country Tools VBI-30-DLC | hobby-rigid | 18000 | 112.3 | 0.00208 | source |
| High Country Tools VBI-30-DLC | business | 18000 | 157.2 | 0.00291 | source |
| High Country Tools VBI-30-DLC | industrial | 18000 | 190.9 | 0.00354 | source |
FAQ
What feeds and speeds for a 1/4" 30-degree V-bit in baltic birch plywood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00094 in per tooth and a feed of 33.7 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" 30-degree V-bit in baltic birch plywood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00146 in per tooth and a feed of 78.6 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" 30-degree V-bit in baltic birch plywood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00208 in per tooth and a feed of 112.3 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" 30-degree V-bit in baltic birch plywood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00291 in per tooth and a feed of 157.2 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" 30-degree V-bit in baltic birch plywood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00354 in per tooth and a feed of 190.9 IPM (1 sourced row). Start low and test in scrap.