90° V-bit feeds and speeds
105 sourced settings for 90° V-bits from Amana Tool, High Country Tools, Sienci Labs. Published chip loads run from 0.00068 to 0.00654 in per tooth.
Other angles: 15° · 18° · 30° · 60° · Calculator →
| Bit | Material | RPM | Feed IPM | Chip load (in) | Manufacturers | Sources |
|---|---|---|---|---|---|---|
| 1/4" 90-degree V-bit | acrylic | 12000–12500 | 51.3–201.9 | 0.00107–0.00404 | High Country Tools | [1] |
| 1/4" 90-degree V-bit | baltic birch plywood | 12000–18000 | 39–220.9 | 0.00081–0.00307 | High Country Tools | [1] |
| 1/4" 90-degree V-bit | dense hardwood (maple, oak) | 12000–18000 | 36.9–209.3 | 0.00077–0.00291 | High Country Tools | [1] |
| 1/4" 90-degree V-bit | epoxy resin | 12000–14500 | 32.8–149.9 | 0.00068–0.00258 | High Country Tools | [1] |
| 1/4" 90-degree V-bit | hardwood | 12000–18000 | 41–232.6 | 0.00086–0.00323 | High Country Tools | [1] |
| 1/4" 90-degree V-bit | hdpe / uhmw | 11500 | 55.1–208 | 0.0012–0.00452 | High Country Tools | [1] |
| 1/4" 90-degree V-bit | mdf | 12000–17000 | 45.1–241.6 | 0.00094–0.00355 | High Country Tools | [1] |
| 1/4" 90-degree V-bit | melamine | 12000–18000 | 34.9–197.7 | 0.00073–0.00275 | High Country Tools | [1] |
| 1/4" 90-degree V-bit | softwood | 12000–17000 | 47.2–252.6 | 0.00098–0.00371 | High Country Tools | [1] |
| 15.0mm 90-degree V-bit | aluminum | 17000 | 53.1 | 0.00156 | Sienci Labs | [1] |
| 15.0mm 90-degree V-bit | hardwood | 17000–22000 | 44.1–68.1 | 0.001–0.002 | Sienci Labs | [1] |
| 15.0mm 90-degree V-bit | plastic | 17000–22000 | 44.1–68.1 | 0.001–0.002 | Sienci Labs | [1] |
| 15.0mm 90-degree V-bit | softwood | 22000 | 44.1–88.2 | 0.001–0.002 | Sienci Labs | [1] |
| 3/8" 90-degree V-bit | acrylic | 12000–12500 | 55.7–219 | 0.00155–0.00584 | High Country Tools | [1] |
| 3/8" 90-degree V-bit | aluminum | 16000 | 50.8–123.3 | 0.00106–0.00257 | High Country Tools | [1] |
| 3/8" 90-degree V-bit | baltic birch plywood | 12000–18000 | 42.3–239.7 | 0.00117–0.00444 | High Country Tools | [1] |
| 3/8" 90-degree V-bit | dense hardwood (maple, oak) | 12000–18000 | 40.1–227.1 | 0.00111–0.0042 | High Country Tools | [1] |
| 3/8" 90-degree V-bit | epoxy resin | 12000–14500 | 35.6–162.6 | 0.00099–0.00374 | High Country Tools | [1] |
| 3/8" 90-degree V-bit | hardwood | 12000–18000 | 44.5–252.3 ⚠ | 0.00124–0.00467 | Amana Tool, High Country Tools | [1] [2] |
| 3/8" 90-degree V-bit | hdpe / uhmw | 11500 | 59.7–225.7 | 0.00173–0.00654 | High Country Tools | [1] |
| 3/8" 90-degree V-bit | mdf | 12000–17000 | 49–262.1 | 0.00136–0.00514 | High Country Tools | [1] |
| 3/8" 90-degree V-bit | melamine | 12000–18000 | 37.8–214.4 | 0.00105–0.00397 | High Country Tools | [1] |
| 3/8" 90-degree V-bit | plastic | 18000 | 90 ⚠ | 0.003 | Amana Tool | [1] |
| 3/8" 90-degree V-bit | softwood | 12000–18000 | 51.2–274 ⚠ | 0.00142–0.00537 | Amana Tool, High Country Tools | [1] [2] |
Each row summarizes the published values for that bit and material across all machine classes (open a size for the per-class breakdown). ⚠ = the manufacturer's chart feed doesn't match its own chip load (see bit page).
90° V-bit: cut width vs depth
Width at the surface = 2 × depth × tan(45°). Standard V-groove geometry; the bit's flat tip, if any, adds its own width.
| Depth (in) | Width (in) | Depth (mm) | Width (mm) |
|---|---|---|---|
| 0.03125 | 0.062 | 0.79 | 1.59 |
| 0.0625 | 0.125 | 1.59 | 3.17 |
| 0.125 | 0.250 | 3.17 | 6.35 |
| 0.1875 | 0.375 | 4.76 | 9.52 |
| 0.25 | 0.500 | 6.35 | 12.70 |
FAQ
What feeds and speeds for a 90 degree V-bit in hardwood?
Published manufacturer data (Amana Tool, High Country Tools, Sienci Labs) gives a chip load of 0.00086–0.00467 in per tooth and a feed of 41–252.3 IPM across 13 sourced settings and all machine classes. Pick your machine class on the page for a tighter range, start low and test in scrap.
What feeds and speeds for a 90 degree V-bit in softwood?
Published manufacturer data (Amana Tool, High Country Tools, Sienci Labs) gives a chip load of 0.00098–0.00537 in per tooth and a feed of 44.1–274 IPM across 13 sourced settings and all machine classes. Pick your machine class on the page for a tighter range, start low and test in scrap.
What feeds and speeds for a 90 degree V-bit in dense hardwood (maple, oak)?
Published manufacturer data (High Country Tools) gives a chip load of 0.00077–0.0042 in per tooth and a feed of 36.9–227.1 IPM across 10 sourced settings and all machine classes. Pick your machine class on the page for a tighter range, start low and test in scrap.
What feeds and speeds for a 90 degree V-bit in baltic birch plywood?
Published manufacturer data (High Country Tools) gives a chip load of 0.00081–0.00444 in per tooth and a feed of 39–239.7 IPM across 10 sourced settings and all machine classes. Pick your machine class on the page for a tighter range, start low and test in scrap.
What feeds and speeds for a 90 degree V-bit in melamine?
Published manufacturer data (High Country Tools) gives a chip load of 0.00073–0.00397 in per tooth and a feed of 34.9–214.4 IPM across 10 sourced settings and all machine classes. Pick your machine class on the page for a tighter range, start low and test in scrap.
What feeds and speeds for a 90 degree V-bit in mdf?
Published manufacturer data (High Country Tools) gives a chip load of 0.00094–0.00514 in per tooth and a feed of 45.1–262.1 IPM across 10 sourced settings and all machine classes. Pick your machine class on the page for a tighter range, start low and test in scrap.
How wide is a 90 degree V-bit cut at 1/8 in deep?
Width = 2 × depth × tan(angle ÷ 2) = 2 × 0.125 × tan(45°) = 0.250 in. That's standard V-groove geometry, not a manufacturer value.