Bits › 4.0mm compression bit › baltic birch plywood
4.0mm compression bit: baltic birch plywood
Other materials: acrylic · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · plastic · softwood · wood / mdf
Same material, other bits: all baltic birch plywood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools COM-4mm-DLC | hobby-ultralight | 12000 | 21.2 | 0.00088 | source |
| High Country Tools COM-4mm-DLC | hobby-light | 18000 | 49.4 | 0.00137 | source |
| High Country Tools COM-4mm-DLC | hobby-rigid | 18000 | 70.5 | 0.00196 | source |
| High Country Tools COM-4mm-DLC | business | 18000 | 98.7 | 0.00274 | source |
| High Country Tools COM-4mm-DLC | industrial | 18000 | 119.9 | 0.00333 | source |
FAQ
What feeds and speeds for a 4.0mm compression bit in baltic birch plywood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00088 in per tooth and a feed of 21.2 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 4.0mm compression bit in baltic birch plywood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00137 in per tooth and a feed of 49.4 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 4.0mm compression bit in baltic birch plywood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00196 in per tooth and a feed of 70.5 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 4.0mm compression bit in baltic birch plywood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00274 in per tooth and a feed of 98.7 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 4.0mm compression bit in baltic birch plywood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00333 in per tooth and a feed of 119.9 IPM (1 sourced row). Start low and test in scrap.