Bits › 3/16" downcut end mill › hdpe / uhmw
3/16" downcut end mill: hdpe / uhmw
Other materials: abs · acetal / delrin (pom) · acrylic · aluminum · baltic birch plywood · cast acrylic · dense hardwood (maple, oak) · epoxy resin · extruded acrylic · hardwood · mdf · melamine · polycarbonate (lexan) · softwood
Same material, other bits: all hdpe / uhmw settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools END-316D-DLC | hobby-ultralight | 11500 | 33 | 0.00143 | source |
| High Country Tools END-316D-DLC | hobby-light | 11500 | 51.3 | 0.00223 | source |
| High Country Tools END-316D-DLC | hobby-rigid | 11500 | 73.2 | 0.00318 | source |
| High Country Tools END-316D-DLC | business | 11500 | 102.5 | 0.00446 | source |
| High Country Tools END-316D-DLC | industrial | 11500 | 124.5 | 0.00541 | source |
FAQ
What feeds and speeds for a 3/16" downcut end mill in hdpe / uhmw on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00143 in per tooth and a feed of 33 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/16" downcut end mill in hdpe / uhmw on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00223 in per tooth and a feed of 51.3 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/16" downcut end mill in hdpe / uhmw on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00318 in per tooth and a feed of 73.2 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/16" downcut end mill in hdpe / uhmw on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00446 in per tooth and a feed of 102.5 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/16" downcut end mill in hdpe / uhmw on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00541 in per tooth and a feed of 124.5 IPM (1 sourced row). Start low and test in scrap.