Bits › 1/8" O-flute bit › acrylic
1/8" O-flute bit: acrylic
Other materials: aluminum · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all acrylic settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools OFS-18U-DLC | hobby-ultralight | 12000 | 27.5 | 0.00229 | source |
| High Country Tools OFL-18U-DLC | hobby-ultralight | 12000 | 27.5 | 0.00229 | source |
| High Country Tools OFS-18U-DLC | hobby-light | 12500 | 44.6 | 0.00357 | source |
| High Country Tools OFL-18U-DLC | hobby-light | 12500 | 44.6 | 0.00357 | source |
| High Country Tools OFS-18U-DLC | hobby-rigid | 12500 | 63.7 | 0.0051 | source |
| High Country Tools OFL-18U-DLC | hobby-rigid | 12500 | 63.7 | 0.0051 | source |
| High Country Tools OFS-18U-DLC | business | 12500 | 89.2 | 0.00713 | source |
| High Country Tools OFL-18U-DLC | business | 12500 | 89.2 | 0.00713 | source |
| High Country Tools OFS-18U-DLC | industrial | 12500 | 108.3 | 0.00866 | source |
| High Country Tools OFL-18U-DLC | industrial | 12500 | 108.3 | 0.00866 | source |
| SpeTool O-flute | any | 18000 | 72 | 0.004 | source |
FAQ
What feeds and speeds for a 1/8" O-flute bit in acrylic on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00229 in per tooth and a feed of 27.5 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in acrylic on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00357 in per tooth and a feed of 44.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in acrylic on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0051 in per tooth and a feed of 63.7 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in acrylic on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00713 in per tooth and a feed of 89.2 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in acrylic on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00866 in per tooth and a feed of 108.3 IPM (2 sourced rows). Start low and test in scrap.