Bits › 1/4" roughing end mill › mdf
1/4" roughing end mill: mdf
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · melamine · softwood
Same material, other bits: all mdf settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools RIPPER-14-DLC | hobby-ultralight | 12000 | 33 | 0.00092 | source |
| High Country Tools RIPPER-14-DLC | hobby-light | 17000 | 72.7 | 0.00143 | source |
| High Country Tools RIPPER-14-DLC | hobby-rigid | 17000 | 103.9 | 0.00204 | source |
| High Country Tools RIPPER-14-DLC | business | 17000 | 145.5 | 0.00285 | source |
| High Country Tools RIPPER-14-DLC | industrial | 17000 | 176.6 | 0.00346 | source |
FAQ
What feeds and speeds for a 1/4" roughing end mill in mdf on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00092 in per tooth and a feed of 33 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" roughing end mill in mdf on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00143 in per tooth and a feed of 72.7 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" roughing end mill in mdf on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00204 in per tooth and a feed of 103.9 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" roughing end mill in mdf on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00285 in per tooth and a feed of 145.5 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" roughing end mill in mdf on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00346 in per tooth and a feed of 176.6 IPM (1 sourced row). Start low and test in scrap.