Bits › 1/4" ball nose bit › mdf
1/4" ball nose bit: mdf
Other materials: acrylic · aluminum · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · melamine · plastic · softwood
Same material, other bits: all mdf settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools BN-14-DLC | hobby-ultralight | 12000 | 49.5 | 0.00103 | source |
| High Country Tools BN-14-DLC | hobby-light | 17000 | 109.1 | 0.0016 | source |
| High Country Tools BN-14-DLC | hobby-rigid | 17000 | 155.8 | 0.00229 | source |
| High Country Tools BN-14-DLC | business | 17000 | 218.1 | 0.00321 | source |
| Amana Tool 46294-K | industrial | 18000 | 250–320 | 0.007–0.009 | source |
| Amana Tool 46490-K | industrial | 18000 | 215–320 | 0.004–0.006 | source |
| Amana Tool 46283 | industrial | 18000 | 250–320 | 0.007–0.009 | source |
| Amana Tool 46490 | industrial | 18000 | 215–320 | 0.004–0.006 | source |
| High Country Tools BN-14-DLC | industrial | 17000 | 264.9 | 0.0039 | source |
FAQ
What feeds and speeds for a 1/4" ball nose bit in mdf on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00103 in per tooth and a feed of 49.5 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" ball nose bit in mdf on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0016 in per tooth and a feed of 109.1 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" ball nose bit in mdf on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00229 in per tooth and a feed of 155.8 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" ball nose bit in mdf on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00321 in per tooth and a feed of 218.1 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" ball nose bit in mdf on a industrial CNC router?
Published manufacturer data (Amana Tool, High Country Tools) gives a chip load of 0.0039–0.009 in per tooth and a feed of 215–320 IPM (5 sourced rows). Start low and test in scrap.