Bits › 1/4" 90-degree V-bit › dense hardwood (maple, oak)
1/4" 90-degree V-bit: dense hardwood (maple, oak)
Other materials: acrylic · baltic birch plywood · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all dense hardwood (maple, oak) settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools VBI-90-DLC | hobby-ultralight | 12000 | 36.9 | 0.00077 | source |
| High Country Tools VBI-90-DLC | hobby-light | 18000 | 86.2 | 0.0012 | source |
| High Country Tools VBI-90-DLC | hobby-rigid | 18000 | 123.1 | 0.00171 | source |
| High Country Tools VBI-90-DLC | business | 18000 | 172.4 | 0.00239 | source |
| High Country Tools VBI-90-DLC | industrial | 18000 | 209.3 | 0.00291 | source |
FAQ
What feeds and speeds for a 1/4" 90-degree V-bit in dense hardwood (maple, oak) on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00077 in per tooth and a feed of 36.9 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" 90-degree V-bit in dense hardwood (maple, oak) on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0012 in per tooth and a feed of 86.2 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" 90-degree V-bit in dense hardwood (maple, oak) on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00171 in per tooth and a feed of 123.1 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" 90-degree V-bit in dense hardwood (maple, oak) on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00239 in per tooth and a feed of 172.4 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" 90-degree V-bit in dense hardwood (maple, oak) on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00291 in per tooth and a feed of 209.3 IPM (1 sourced row). Start low and test in scrap.