1/4" 18-degree V-bit feeds and speeds
6 sourced settings from Amana Tool. Published chip loads range from 0.003 to 0.007 in per tooth. Pick your material:
aluminum (1) · hardwood (1) · plastic (2) · softwood (1) · solid surface (1)
All 18° V-bit sizes and cut width vs depth → · Open the calculator →
| Manufacturer / bit | Material | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|---|
| Amana Tool 45783 | Aluminum | industrial | 18000 | 50–130 ⚠ | 0.003–0.007 | source |
| Amana Tool 45783 | Hardwood | industrial | 18000 | 50–130 ⚠ | 0.003–0.007 | source |
| Amana Tool 45783 | Soft plastic | industrial | 18000 | 50–130 ⚠ | 0.003–0.007 | source |
| Amana Tool 45783 | Hard plastic | industrial | 18000 | 50–130 ⚠ | 0.003–0.007 | source |
| Amana Tool 45783 | Softwood | industrial | 18000 | 50–130 ⚠ | 0.003–0.007 | source |
| Amana Tool 45783 | Solid surface | industrial | 18000 | 50–130 ⚠ | 0.003–0.007 | source |
FAQ
What feeds and speeds for a 1/4" 18-degree V-bit on a industrial CNC router?
Published manufacturer data (Amana Tool) gives a chip load of 0.003–0.007 in per tooth and a feed of 50–130 IPM (6 sourced rows). Start low and test in scrap.