Bits › 1/2" upcut end mill › softwood
1/2" upcut end mill: softwood
Other materials: abs · acrylic · baltic birch plywood · cast acrylic · dense hardwood (maple, oak) · epoxy resin · extruded acrylic · hardwood · hdpe / uhmw · mdf · melamine · polycarbonate (lexan)
Same material, other bits: all softwood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools END-12U-DLC | hobby-ultralight | 12000 | 60.4 | 0.00126 | source |
| High Country Tools END-12U-DLC | hobby-light | 17000 | 133.1 | 0.00196 | source |
| High Country Tools END-12U-DLC | hobby-rigid | 17000 | 190.1 | 0.0028 | source |
| High Country Tools END-12U-DLC | business | 17000 | 266.1 | 0.00391 | source |
| High Country Tools END-12U-DLC | industrial | 17000 | 323.2 | 0.00475 | source |
| SpeTool Carbide | any | 15000 | 360 | 0.012 | source |
FAQ
What feeds and speeds for a 1/2" upcut end mill in softwood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00126 in per tooth and a feed of 60.4 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" upcut end mill in softwood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00196 in per tooth and a feed of 133.1 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" upcut end mill in softwood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0028 in per tooth and a feed of 190.1 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" upcut end mill in softwood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00391 in per tooth and a feed of 266.1 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" upcut end mill in softwood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00475 in per tooth and a feed of 323.2 IPM (1 sourced row). Start low and test in scrap.