Bits › 1/2" roundover bit › epoxy resin
1/2" roundover bit: epoxy resin
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all epoxy resin settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools PRO-14 | hobby-ultralight | 12000 | 34.1 | 0.00142 | source |
| High Country Tools BOWL-12 | hobby-ultralight | 12000 | 34.1 | 0.00142 | source |
| High Country Tools PRO-14 | hobby-light | 14500 | 64 | 0.00221 | source |
| High Country Tools BOWL-12 | hobby-light | 14500 | 64 | 0.00221 | source |
| High Country Tools PRO-14 | hobby-rigid | 14500 | 91.5 | 0.00315 | source |
| High Country Tools BOWL-12 | hobby-rigid | 14500 | 91.5 | 0.00315 | source |
| High Country Tools PRO-14 | business | 14500 | 128.1 | 0.00442 | source |
| High Country Tools BOWL-12 | business | 14500 | 128.1 | 0.00442 | source |
| High Country Tools PRO-14 | industrial | 14500 | 155.5 | 0.00536 | source |
| High Country Tools BOWL-12 | industrial | 14500 | 155.5 | 0.00536 | source |
FAQ
What feeds and speeds for a 1/2" roundover bit in epoxy resin on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00142 in per tooth and a feed of 34.1 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/2" roundover bit in epoxy resin on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00221 in per tooth and a feed of 64 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/2" roundover bit in epoxy resin on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00315 in per tooth and a feed of 91.5 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/2" roundover bit in epoxy resin on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00442 in per tooth and a feed of 128.1 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/2" roundover bit in epoxy resin on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00536 in per tooth and a feed of 155.5 IPM (2 sourced rows). Start low and test in scrap.