Bits › 1/16" downcut end mill › epoxy resin
1/16" downcut end mill: epoxy resin
Other materials: abs · acetal / delrin (pom) · acrylic · aluminum · baltic birch plywood · cast acrylic · dense hardwood (maple, oak) · extruded acrylic · hardwood · hdpe / uhmw · mdf · melamine · polycarbonate (lexan) · softwood
Same material, other bits: all epoxy resin settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools END-116D-DLC | hobby-ultralight | 12000 | 10.6 | 0.00044 | source |
| High Country Tools END-116D14-DLC | hobby-ultralight | 12000 | 10.6 | 0.00044 | source |
| High Country Tools END-116D-DLC | hobby-light | 14500 | 19.9 | 0.00069 | source |
| High Country Tools END-116D14-DLC | hobby-light | 14500 | 19.9 | 0.00069 | source |
| High Country Tools END-116D-DLC | hobby-rigid | 14500 | 28.5 | 0.00098 | source |
| High Country Tools END-116D14-DLC | hobby-rigid | 14500 | 28.5 | 0.00098 | source |
| High Country Tools END-116D-DLC | business | 14500 | 39.9 | 0.00138 | source |
| High Country Tools END-116D14-DLC | business | 14500 | 39.9 | 0.00138 | source |
| High Country Tools END-116D-DLC | industrial | 14500 | 48.4 | 0.00167 | source |
| High Country Tools END-116D14-DLC | industrial | 14500 | 48.4 | 0.00167 | source |
FAQ
What feeds and speeds for a 1/16" downcut end mill in epoxy resin on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00044 in per tooth and a feed of 10.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/16" downcut end mill in epoxy resin on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00069 in per tooth and a feed of 19.9 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/16" downcut end mill in epoxy resin on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00098 in per tooth and a feed of 28.5 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/16" downcut end mill in epoxy resin on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00138 in per tooth and a feed of 39.9 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/16" downcut end mill in epoxy resin on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00167 in per tooth and a feed of 48.4 IPM (2 sourced rows). Start low and test in scrap.