Beta: metal milling. Every number is copied as published by the tool maker and linked to its source. A machinist hasn't reviewed this section yet; rows marked ⚠ have a specific open question. Starting points only: verify against your tool's own chart.
Brass: SFM & IPT for carbide end mills
189 published values. RPM = 3.82 × SFM ÷ D, feed IPM = RPM × flutes × IPT. Calculate for your machine →
Harvey Tool: General Machining Guidelines: Carbide End Mills
Tool: Solid carbide end mill (general guideline, any flute count). Facts copied with attribution and link; table layout not reproduced. Harvey notes values are suggested starting values.
| Grade (as listed) | Cut | Dia | SFM | IPT (in) | Review | Source |
|---|---|---|---|---|---|---|
| Yellow Brass, High Lead Brass, Red Brass | general | 1/8" | 800–1500 | 0.001 | ⚠ Helical H35AL-3 lists 770 SFM for brass-type copper alloys vs Harvey 800-1500; confirm. Spot-checked 2026-10-16: Harvey 800–1500 SFM applies to yellow/leaded (free-machining) brass; naval brass and bronze run about 600–1000 SFM. ✓ Cross-checked | Harvey Tool |
| Yellow Brass, High Lead Brass, Red Brass | general | 3/16" | 800–1500 | 0.001 | ⚠ Helical H35AL-3 lists 770 SFM for brass-type copper alloys vs Harvey 800-1500; confirm. Spot-checked 2026-10-16: Harvey 800–1500 SFM applies to yellow/leaded (free-machining) brass; naval brass and bronze run about 600–1000 SFM. ✓ Cross-checked | Harvey Tool |
| Yellow Brass, High Lead Brass, Red Brass | general | 1/4" | 800–1500 | 0.002 | ⚠ Helical H35AL-3 lists 770 SFM for brass-type copper alloys vs Harvey 800-1500; confirm. Spot-checked 2026-10-16: Harvey 800–1500 SFM applies to yellow/leaded (free-machining) brass; naval brass and bronze run about 600–1000 SFM. ✓ Cross-checked | Harvey Tool |
| Yellow Brass, High Lead Brass, Red Brass | general | 3/8" | 800–1500 | 0.0025 | ⚠ Helical H35AL-3 lists 770 SFM for brass-type copper alloys vs Harvey 800-1500; confirm. Spot-checked 2026-10-16: Harvey 800–1500 SFM applies to yellow/leaded (free-machining) brass; naval brass and bronze run about 600–1000 SFM. ✓ Cross-checked | Harvey Tool |
| Yellow Brass, High Lead Brass, Red Brass | general | 1/2" | 800–1500 | 0.003 | ⚠ Helical H35AL-3 lists 770 SFM for brass-type copper alloys vs Harvey 800-1500; confirm. Spot-checked 2026-10-16: Harvey 800–1500 SFM applies to yellow/leaded (free-machining) brass; naval brass and bronze run about 600–1000 SFM. ✓ Cross-checked | Harvey Tool |
| Yellow Brass, High Lead Brass, Red Brass | general | 5/8" | 800–1500 | 0.004 | ⚠ Helical H35AL-3 lists 770 SFM for brass-type copper alloys vs Harvey 800-1500; confirm. Spot-checked 2026-10-16: Harvey 800–1500 SFM applies to yellow/leaded (free-machining) brass; naval brass and bronze run about 600–1000 SFM. ✓ Cross-checked | Harvey Tool |
| Yellow Brass, High Lead Brass, Red Brass | general | 3/4" | 800–1500 | 0.004 | ⚠ Helical H35AL-3 lists 770 SFM for brass-type copper alloys vs Harvey 800-1500; confirm. Spot-checked 2026-10-16: Harvey 800–1500 SFM applies to yellow/leaded (free-machining) brass; naval brass and bronze run about 600–1000 SFM. ✓ Cross-checked | Harvey Tool |
| Yellow Brass, High Lead Brass, Red Brass | general | 1" | 800–1500 | 0.005 | ⚠ Helical H35AL-3 lists 770 SFM for brass-type copper alloys vs Harvey 800-1500; confirm. Spot-checked 2026-10-16: Harvey 800–1500 SFM applies to yellow/leaded (free-machining) brass; naval brass and bronze run about 600–1000 SFM. ✓ Cross-checked | Harvey Tool |
Helical Solutions (Harvey Performance): Speeds & Feeds H35AL-3 / H35AL-RN-3 (3 flute, 35° helix)
Tool: 3-flute carbide end mill for aluminum (H35AL-3). Facts copied with attribution and link; PDF not re-hosted. IPT is for 2.5xD LOC, non-reached tools.
| Grade (as listed) | Cut | Dia | SFM | IPT (in) | Review | Source |
|---|---|---|---|---|---|---|
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 1/8" | 770 | 0.0008 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 1/8" | 770 | 0.0014 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 1/8" | 770 | 0.0016 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 3/16" | 770 | 0.0011 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 3/16" | 770 | 0.002 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 3/16" | 770 | 0.0018 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 1/4" | 770 | 0.0015 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 1/4" | 770 | 0.0027 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 1/4" | 770 | 0.0021 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 3/8" | 770 | 0.0022 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 3/8" | 770 | 0.004 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 3/8" | 770 | 0.0024 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 1/2" | 770 | 0.0029 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 1/2" | 770 | 0.0052 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 1/2" | 770 | 0.0028 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 3/4" | 770 | 0.0041 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 3/4" | 770 | 0.0074 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 3/4" | 770 | 0.0033 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 1" | 770 | 0.0052 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 1" | 770 | 0.0095 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 1" | 770 | 0.004 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
Helical Solutions (Harvey Performance): Speeds & Feeds H45AL-2 / H45AL-RN-2 (2 flute, 45° helix)
Tool: 2-flute carbide end mill for aluminum (H45AL-2). Facts copied with attribution and link; PDF not re-hosted. IPT is for 2.5xD LOC, non-reached tools.
| Grade (as listed) | Cut | Dia | SFM | IPT (in) | Review | Source |
|---|---|---|---|---|---|---|
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 1/8" | 770 | 0.0007 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 1/8" | 770 | 0.0015 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 1/8" | 770 | 0.0019 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 3/16" | 770 | 0.0011 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 3/16" | 770 | 0.0022 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 3/16" | 770 | 0.0021 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 1/4" | 770 | 0.0014 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 1/4" | 770 | 0.0029 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 1/4" | 770 | 0.0024 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 3/8" | 770 | 0.0021 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 3/8" | 770 | 0.0044 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 3/8" | 770 | 0.0027 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 1/2" | 770 | 0.0028 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 1/2" | 770 | 0.0057 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 1/2" | 770 | 0.0032 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 3/4" | 770 | 0.004 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 3/4" | 770 | 0.0082 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 3/4" | 770 | 0.0038 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | slotting | 1" | 770 | 0.0051 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | roughing | 1" | 770 | 0.0104 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
| Copper alloys: Cu-ETP, CuBe2, CuZn30, CuZn36Pb3, CuZn10, CuSn5 | finishing | 1" | 770 | 0.0047 | Spot-checked 2026-10-16: Helical's 770 SFM could not be verified against a public page; treat as unverified. ✓ Cross-checked | Helical Solutions |
Lakeshore Carbide: General Purpose End Mill Technical Data / Speeds & Feeds
Tool: General purpose solid carbide end mill (stub/regular/corner radius column). Facts copied with attribution and link; PDF not re-hosted. Lakeshore: "approximate numbers are a good starting point."
| Grade (as listed) | Cut | Dia | SFM | IPT (in) | Review | Source |
|---|---|---|---|---|---|---|
| Brass | general | 1/32–1/8" | 300–500 | 0.0006–0.0015 | – ✓ Cross-checked | Lakeshore Carbide |
| Brass | general | 1/8–1/4" | 300–500 | 0.0008–0.0018 | – ✓ Cross-checked | Lakeshore Carbide |
| Brass | general | 1/4–3/8" | 300–500 | 0.0015–0.003 | – ✓ Cross-checked | Lakeshore Carbide |
| Brass | general | 3/8–1/2" | 300–500 | 0.0025–0.0035 | – ✓ Cross-checked | Lakeshore Carbide |
| Brass | general | 1/2–3/4" | 300–500 | 0.003–0.0045 | – ✓ Cross-checked | Lakeshore Carbide |
| Brass | general | 3/4–1" | 300–500 | 0.004–0.0055 | – ✓ Cross-checked | Lakeshore Carbide |
OSG: Standard 2 Flute HSS-Co end mills: tech page (slotting)
Tool: 2-flute HSS-Co (cobalt high-speed steel) end mill, uncoated (OSG notes TiN/TiCN versions allow up to 15-20% more speed). Facts copied with attribution and link; PDF not re-hosted.
| Grade (as listed) | Cut | Dia | SFM | IPT (in) | Review | Source |
|---|---|---|---|---|---|---|
| Mild steels, brass, bronze (<145 HB) | slotting | 1/64" | 80–150 | 2e-05 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 1/32" | 80–150 | 7e-05 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 3/64" | 80–150 | 0.00014 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 1/16" | 80–150 | 0.0002 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 5/64" | 80–150 | 0.00028 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 3/32" | 80–150 | 0.0004 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 7/64" | 80–150 | 0.00047 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 1/8" | 80–150 | 0.00056 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 9/64" | 80–150 | 0.00067 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 5/32" | 80–150 | 0.0008 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 11/64" | 80–150 | 0.00095 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 3/16" | 80–150 | 0.0011 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 1/4" | 80–150 | 0.0016 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 5/16" | 80–150 | 0.00224 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 3/8" | 80–150 | 0.00265 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 7/16" | 80–150 | 0.00335 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 1/2" | 80–150 | 0.00375 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 9/16" | 80–150 | 0.004 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 5/8" | 80–150 | 0.00425 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 11/16" | 80–150 | 0.00475 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 3/4" | 80–150 | 0.00475 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 13/16" | 80–150 | 0.005 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 7/8" | 80–150 | 0.0053 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 15/16" | 80–150 | 0.0056 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 1" | 80–150 | 0.0056 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 1 1/8" | 80–150 | 0.0056 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 1 1/4" | 80–150 | 0.006 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 1 3/8" | 80–150 | 0.006 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 1 1/2" | 80–150 | 0.0063 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 1 5/8" | 80–150 | 0.0063 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 1 3/4" | 80–150 | 0.0063 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 1 7/8" | 80–150 | 0.0063 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | slotting | 2" | 80–150 | 0.0063 | Slotting, axial depth 0.5×D (as printed). ✓ Cross-checked | OSG |
OSG: Standard 4 Flute and 6 Flute HSS-Co end mills: tech page (side milling)
Tool: 4-flute HSS-Co (cobalt high-speed steel) end mill. Facts copied with attribution and link; PDF not re-hosted.
| Grade (as listed) | Cut | Dia | SFM | IPT (in) | Review | Source |
|---|---|---|---|---|---|---|
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 1/16" | 80–150 | 0.0002 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 5/64" | 80–150 | 0.00028 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 3/32" | 80–150 | 0.0004 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 7/64" | 80–150 | 0.00048 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 1/8" | 80–150 | 0.00056 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 9/64" | 80–150 | 0.00067 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 5/32" | 80–150 | 0.0008 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 11/64" | 80–150 | 0.00095 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 3/16" | 80–150 | 0.0011 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 1/4" | 80–150 | 0.0016 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 5/16" | 80–150 | 0.00224 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 3/8" | 80–150 | 0.00265 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 7/16" | 80–150 | 0.00335 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 1/2" | 80–150 | 0.00375 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 9/16" | 80–150 | 0.004 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 5/8" | 80–150 | 0.00425 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 11/16" | 80–150 | 0.00475 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 3/4" | 80–150 | 0.00475 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 13/16" | 80–150 | 0.005 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 7/8" | 80–150 | 0.0053 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 15/16" | 80–150 | 0.0056 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 1" | 80–150 | 0.0056 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 1 1/8" | 80–150 | 0.0056 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 1 1/4" | 80–150 | 0.006 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 1 3/8" | 80–150 | 0.006 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 1 1/2" | 80–150 | 0.0063 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 1 3/4" | 80–150 | 0.0063 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
| Mild steels, brass, bronze (<145 HB) | profiling (side milling) | 2" | 80–150 | 0.0063 | Side milling, axial 1.5×D, radial 0.1×D (as printed). ✓ Cross-checked | OSG |
Accupro (MSC Industrial): General Purpose End Mills Recommended Speed and Feed (under and over 32 HRC)
Tool: General purpose carbide end mill, coated (Accupro: reduce rates up to 50% for uncoated). Facts copied with attribution and link; PDF not re-hosted.
| Grade (as listed) | Cut | Dia | SFM | IPT (in) | Review | Source |
|---|---|---|---|---|---|---|
| Yellow brass, high lead brass, red brass | general | 1/8" | 800–1500 | 0.001 | – ✓ Cross-checked | Accupro |
| Yellow brass, high lead brass, red brass | general | 3/16" | 800–1500 | 0.001 | – ✓ Cross-checked | Accupro |
| Yellow brass, high lead brass, red brass | general | 1/4" | 800–1500 | 0.002 | – ✓ Cross-checked | Accupro |
| Yellow brass, high lead brass, red brass | general | 3/8" | 800–1500 | 0.0025 | – ✓ Cross-checked | Accupro |
| Yellow brass, high lead brass, red brass | general | 1/2" | 800–1500 | 0.003 | – ✓ Cross-checked | Accupro |
| Yellow brass, high lead brass, red brass | general | 5/8" | 800–1500 | 0.004 | – ✓ Cross-checked | Accupro |
| Yellow brass, high lead brass, red brass | general | 3/4" | 800–1500 | 0.004 | – ✓ Cross-checked | Accupro |
| Yellow brass, high lead brass, red brass | general | 1" | 800–1500 | 0.005 | – ✓ Cross-checked | Accupro |
| Naval brass, high silicon bronze, A-17, C-17200 (>32 HRC) | general | 1/8" | 500–900 | 0.001 | – ✓ Cross-checked | Accupro |
| Naval brass, high silicon bronze, A-17, C-17200 (>32 HRC) | general | 3/16" | 500–900 | 0.001 | – ✓ Cross-checked | Accupro |
| Naval brass, high silicon bronze, A-17, C-17200 (>32 HRC) | general | 1/4" | 500–900 | 0.002 | – ✓ Cross-checked | Accupro |
| Naval brass, high silicon bronze, A-17, C-17200 (>32 HRC) | general | 3/8" | 500–900 | 0.0025 | – ✓ Cross-checked | Accupro |
| Naval brass, high silicon bronze, A-17, C-17200 (>32 HRC) | general | 1/2" | 500–900 | 0.003 | – ✓ Cross-checked | Accupro |
| Naval brass, high silicon bronze, A-17, C-17200 (>32 HRC) | general | 5/8" | 500–900 | 0.004 | – ✓ Cross-checked | Accupro |
| Naval brass, high silicon bronze, A-17, C-17200 (>32 HRC) | general | 3/4" | 500–900 | 0.004 | – ✓ Cross-checked | Accupro |
| Naval brass, high silicon bronze, A-17, C-17200 (>32 HRC) | general | 1" | 500–900 | 0.005 | – ✓ Cross-checked | Accupro |
Lakeshore Carbide: VFA technical data: Variable Flute for Aluminum speeds and feeds
Tool: Variable-flute carbide end mill for aluminum (VFA). Facts copied with attribution and link; PDF not re-hosted. PDF is an image; values transcribed by eye.
| Grade (as listed) | Cut | Dia | SFM | IPT (in) | Review | Source |
|---|---|---|---|---|---|---|
| Brass / bronze | general | 1/8" | 200–1500 | 0.0015 | Profiling depth 1×D, slotting depth 0.5×D (as printed). Coolant blast beneficial. ✓ Cross-checked | Lakeshore Carbide |
| Brass / bronze | general | 1/4" | 200–1500 | 0.003 | Profiling depth 1×D, slotting depth 0.5×D (as printed). Coolant blast beneficial. ✓ Cross-checked | Lakeshore Carbide |
| Brass / bronze | general | 5/16" | 200–1500 | 0.004 | Profiling depth 1×D, slotting depth 0.5×D (as printed). Coolant blast beneficial. ✓ Cross-checked | Lakeshore Carbide |
| Brass / bronze | general | 3/8" | 200–1500 | 0.005 | Profiling depth 1×D, slotting depth 0.5×D (as printed). Coolant blast beneficial. ✓ Cross-checked | Lakeshore Carbide |
| Brass / bronze | general | 1/2" | 200–1500 | 0.006 | Profiling depth 1×D, slotting depth 0.5×D (as printed). Coolant blast beneficial. ✓ Cross-checked | Lakeshore Carbide |
| Brass / bronze | general | 5/8" | 200–1500 | 0.007 | Profiling depth 1×D, slotting depth 0.5×D (as printed). Coolant blast beneficial. ✓ Cross-checked | Lakeshore Carbide |
| Brass / bronze | general | 3/4" | 200–1500 | 0.008 | Profiling depth 1×D, slotting depth 0.5×D (as printed). Coolant blast beneficial. ✓ Cross-checked | Lakeshore Carbide |
| Brass / bronze | general | 1" | 200–1500 | 0.01 | Profiling depth 1×D, slotting depth 0.5×D (as printed). Coolant blast beneficial. ✓ Cross-checked | Lakeshore Carbide |
YG-1: ALU-POWER HPC recommended cutting conditions (inch), 3-flute
Tool: 3-flute ALU-POWER HPC carbide end mill for aluminum/non-ferrous (same chart covers the coated and uncoated series). Facts copied with attribution and link; PDF not re-hosted.
| Grade (as listed) | Cut | Dia | SFM | IPT (in) | Review | Source |
|---|---|---|---|---|---|---|
| Copper and copper alloys (bronze / brass) | slotting | 1/8" | 880 | 0.0008 | Slotting, Ae 1.0D, Ap 1.0D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | slotting | 3/16" | 880 | 0.0012 | Slotting, Ae 1.0D, Ap 1.0D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | slotting | 1/4" | 880 | 0.002 | Slotting, Ae 1.0D, Ap 1.0D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | slotting | 5/16" | 880 | 0.0025 | Slotting, Ae 1.0D, Ap 1.0D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | slotting | 3/8" | 880 | 0.004 | Slotting, Ae 1.0D, Ap 1.0D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | slotting | 1/2" | 880 | 0.005 | Slotting, Ae 1.0D, Ap 1.0D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | slotting | 5/8" | 880 | 0.0055 | Slotting, Ae 1.0D, Ap 1.0D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | slotting | 3/4" | 880 | 0.006 | Slotting, Ae 1.0D, Ap 1.0D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | slotting | 1" | 880 | 0.007 | Slotting, Ae 1.0D, Ap 1.0D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 1/8" | 1150 | 0.0008 | Side cutting, Ae 0.5D, Ap 1.5D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 3/16" | 1150 | 0.0012 | Side cutting, Ae 0.5D, Ap 1.5D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 1/4" | 1150 | 0.002 | Side cutting, Ae 0.5D, Ap 1.5D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 5/16" | 1150 | 0.0025 | Side cutting, Ae 0.5D, Ap 1.5D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 3/8" | 1150 | 0.004 | Side cutting, Ae 0.5D, Ap 1.5D (as printed). ⚠ Outlier (for review): IPT 0.0085 vs median 0.0025 of 7 other source(s) (+240%); SFM 1850 vs median 770 of 7 other source(s) (+140%) | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 1/2" | 1150 | 0.005 | Side cutting, Ae 0.5D, Ap 1.5D (as printed). ⚠ Outlier (for review): IPT 0.0115 vs median 0.003 of 7 other source(s) (+283%); SFM 1850 vs median 770 of 7 other source(s) (+140%) | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 5/8" | 1150 | 0.0055 | Side cutting, Ae 0.5D, Ap 1.5D (as printed). ⚠ Outlier (for review): IPT 0.013 vs median 0.0043 of 4 other source(s) (+202%); SFM 1850 vs median 770 of 7 other source(s) (+140%) | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 3/4" | 1150 | 0.006 | Side cutting, Ae 0.5D, Ap 1.5D (as printed). ⚠ Outlier (for review): IPT 0.014 vs median 0.004 of 7 other source(s) (+250%); SFM 1850 vs median 770 of 7 other source(s) (+140%) | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 1" | 1150 | 0.007 | Side cutting, Ae 0.5D, Ap 1.5D (as printed). ⚠ Outlier (for review): IPT 0.016 vs median 0.0051 of 7 other source(s) (+214%); SFM 1850 vs median 770 of 7 other source(s) (+140%) | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 1/8" | 1850 | 0.0017 | HSM light side cutting, Ae 0.05D, Ap 2.0D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 3/16" | 1850 | 0.0026 | HSM light side cutting, Ae 0.05D, Ap 2.0D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 1/4" | 1850 | 0.0045 | HSM light side cutting, Ae 0.05D, Ap 2.0D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 5/16" | 1850 | 0.0056 | HSM light side cutting, Ae 0.05D, Ap 2.0D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 3/8" | 1850 | 0.0085 | HSM light side cutting, Ae 0.05D, Ap 2.0D (as printed). ⚠ Outlier (for review): IPT 0.0085 vs median 0.0025 of 7 other source(s) (+240%); SFM 1850 vs median 770 of 7 other source(s) (+140%) | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 1/2" | 1850 | 0.0115 | HSM light side cutting, Ae 0.05D, Ap 2.0D (as printed). ⚠ Outlier (for review): IPT 0.0115 vs median 0.003 of 7 other source(s) (+283%); SFM 1850 vs median 770 of 7 other source(s) (+140%) | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 5/8" | 1850 | 0.013 | HSM light side cutting, Ae 0.05D, Ap 2.0D (as printed). ⚠ Outlier (for review): IPT 0.013 vs median 0.0043 of 4 other source(s) (+202%); SFM 1850 vs median 770 of 7 other source(s) (+140%) | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 3/4" | 1850 | 0.014 | HSM light side cutting, Ae 0.05D, Ap 2.0D (as printed). ⚠ Outlier (for review): IPT 0.014 vs median 0.004 of 7 other source(s) (+250%); SFM 1850 vs median 770 of 7 other source(s) (+140%) | YG-1 |
| Copper and copper alloys (bronze / brass) | profiling (side milling) | 1" | 1850 | 0.016 | HSM light side cutting, Ae 0.05D, Ap 2.0D (as printed). ⚠ Outlier (for review): IPT 0.016 vs median 0.0051 of 7 other source(s) (+214%); SFM 1850 vs median 770 of 7 other source(s) (+140%) | YG-1 |
| Copper and copper alloys (bronze / brass) | finishing | 1/8" | 1700 | 0.0009 | Profiling, Ae 0.2D, Ap 0.1D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | finishing | 3/16" | 1700 | 0.0013 | Profiling, Ae 0.2D, Ap 0.1D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | finishing | 1/4" | 1700 | 0.0018 | Profiling, Ae 0.2D, Ap 0.1D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | finishing | 5/16" | 1700 | 0.0022 | Profiling, Ae 0.2D, Ap 0.1D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | finishing | 3/8" | 1700 | 0.0026 | Profiling, Ae 0.2D, Ap 0.1D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | finishing | 1/2" | 1700 | 0.0035 | Profiling, Ae 0.2D, Ap 0.1D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | finishing | 5/8" | 1700 | 0.0044 | Profiling, Ae 0.2D, Ap 0.1D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | finishing | 3/4" | 1700 | 0.0053 | Profiling, Ae 0.2D, Ap 0.1D (as printed). ✓ Cross-checked | YG-1 |
| Copper and copper alloys (bronze / brass) | finishing | 1" | 1700 | 0.007 | Profiling, Ae 0.2D, Ap 0.1D (as printed). ✓ Cross-checked | YG-1 |
Sandvik Coromant: CoroMill Dura cutting data: Versatile 1-2 x D assortment
Tool: CoroMill Dura solid carbide end mill (1-2×D, typically 4 flutes; Sandvik: +30% fz for Z2/Z3 versions). Facts copied with attribution and link; PDF not re-hosted. Sandvik points to CoroPlus ToolGuide for optimized data.
| Grade (as listed) | Cut | Dia | SFM | IPT (in) | Review | Source |
|---|---|---|---|---|---|---|
| Copper and copper alloys (N3.2, 90 HB) | slotting | 1/4" | 426 | 0.0022 | Slot: ae 1.0×D, ap 0.5×D (as printed). Feed code F03. ✓ Cross-checked | Sandvik Coromant |
| Copper and copper alloys (N3.2, 90 HB) | slotting | 3/8" | 426 | 0.003 | Slot: ae 1.0×D, ap 0.5×D (as printed). Feed code F03. ✓ Cross-checked | Sandvik Coromant |
| Copper and copper alloys (N3.2, 90 HB) | slotting | 1/2" | 426 | 0.0038 | Slot: ae 1.0×D, ap 0.5×D (as printed). Feed code F03. ✓ Cross-checked | Sandvik Coromant |
| Copper and copper alloys (N3.2, 90 HB) | slotting | 5/8" | 426 | 0.0046 | Slot: ae 1.0×D, ap 0.5×D (as printed). Feed code F03. ✓ Cross-checked | Sandvik Coromant |
| Copper and copper alloys (N3.2, 90 HB) | slotting | 3/4" | 426 | 0.0054 | Slot: ae 1.0×D, ap 0.5×D (as printed). Feed code F03. ✓ Cross-checked | Sandvik Coromant |
| Copper and copper alloys (N3.2, 90 HB) | slotting | 1" | 426 | 0.0071 | Slot: ae 1.0×D, ap 0.5×D (as printed). Feed code F03. ✓ Cross-checked | Sandvik Coromant |
| Copper and copper alloys (N3.2, 90 HB) | profiling (side milling) | 1/4" | 557 | 0.0022 | Side milling: ae 0.5×D, ap 1.0×D (as printed). Feed code F03. ✓ Cross-checked | Sandvik Coromant |
| Copper and copper alloys (N3.2, 90 HB) | profiling (side milling) | 3/8" | 557 | 0.003 | Side milling: ae 0.5×D, ap 1.0×D (as printed). Feed code F03. ✓ Cross-checked | Sandvik Coromant |
| Copper and copper alloys (N3.2, 90 HB) | profiling (side milling) | 1/2" | 557 | 0.0038 | Side milling: ae 0.5×D, ap 1.0×D (as printed). Feed code F03. ✓ Cross-checked | Sandvik Coromant |
| Copper and copper alloys (N3.2, 90 HB) | profiling (side milling) | 5/8" | 557 | 0.0046 | Side milling: ae 0.5×D, ap 1.0×D (as printed). Feed code F03. ✓ Cross-checked | Sandvik Coromant |
| Copper and copper alloys (N3.2, 90 HB) | profiling (side milling) | 3/4" | 557 | 0.0054 | Side milling: ae 0.5×D, ap 1.0×D (as printed). Feed code F03. ✓ Cross-checked | Sandvik Coromant |
| Copper and copper alloys (N3.2, 90 HB) | profiling (side milling) | 1" | 557 | 0.0071 | Side milling: ae 0.5×D, ap 1.0×D (as printed). Feed code F03. ✓ Cross-checked | Sandvik Coromant |
Weekly "what changed" email: coming soon
We'll email you when a maker updates their feeds and speeds.