ChipLoad

Feeds & speeds for hdpe / uhmw

345 sourced settings. By bit: 1" roundover bit · 1/16" downcut end mill · 1/2" ball nose bit · 1/2" compression bit · 1/2" downcut end mill · 1/2" roughing end mill · 1/2" roundover bit · 1/2" upcut end mill · 1/4" 15-degree V-bit · 1/4" 30-degree V-bit · 1/4" 60-degree V-bit · 1/4" 90-degree V-bit · 1/4" O-flute bit · 1/4" ball nose bit · 1/4" compression bit · 1/4" downcut end mill · 1/4" roughing end mill · 1/4" roundover bit · 1/4" tapered ball nose bit · 1/4" upcut end mill · 1/8" O-flute bit · 1/8" compression bit · 1/8" downcut end mill · 1/8" upcut end mill · 3/16" O-flute bit · 3/16" compression bit · 3/16" downcut end mill · 3/16" roundover bit · 3/4" roundover bit · 3/8" 30-degree V-bit · 3/8" 60-degree V-bit · 3/8" 90-degree V-bit · 3/8" compression bit · 3/8" downcut end mill · 3/8" keyhole / slot bit · 3/8" roughing end mill · 3/8" roundover bit · 3/8" tapered ball nose bit · 3/8" upcut end mill · 31.8mm dovetail bit · 34.9mm surfacing bit · 4.0mm compression bit · 5.0mm drill bit · 69.8mm surfacing bit · 8.0mm tapered ball nose bit

FAQ

What feeds and speeds for a bit in hdpe / uhmw on a hobby-ultralight CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00077–0.00379 in per tooth and a feed of 13–76.9 IPM (69 sourced rows). Start low and test in scrap.

What feeds and speeds for a bit in hdpe / uhmw on a hobby-light CNC router?
Published maker data (High Country Tools) gives a chip load of 0.0012–0.00589 in per tooth and a feed of 20.3–119.7 IPM (69 sourced rows). Start low and test in scrap.

What feeds and speeds for a bit in hdpe / uhmw on a hobby-rigid CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00172–0.00842 in per tooth and a feed of 29–171 IPM (69 sourced rows). Start low and test in scrap.

What feeds and speeds for a bit in hdpe / uhmw on a business CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00241–0.01179 in per tooth and a feed of 40.6–239.4 IPM (69 sourced rows). Start low and test in scrap.

What feeds and speeds for a bit in hdpe / uhmw on a industrial CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00292–0.01431 in per tooth and a feed of 49.3–290.7 IPM (69 sourced rows). Start low and test in scrap.

Weekly "what changed" email: coming soon

We'll email you when a maker updates their feeds and speeds.