Feeds & speeds for hardwood
371 sourced settings. By bit: 0.5mm tapered ball nose bit · 1" ball nose bit · 1" roundover bit · 1.5mm tapered ball nose bit · 1/16" downcut end mill · 1/16" flat end mill · 1/2" ball nose bit · 1/2" compression bit · 1/2" downcut end mill · 1/2" roughing end mill · 1/2" roundover bit · 1/2" upcut end mill · 1/4" 15-degree V-bit · 1/4" 30-degree V-bit · 1/4" 60-degree V-bit · 1/4" 90-degree V-bit · 1/4" O-flute bit · 1/4" ball nose bit · 1/4" compression bit · 1/4" downcut end mill · 1/4" flat end mill · 1/4" roughing end mill · 1/4" roundover bit · 1/4" tapered ball nose bit · 1/4" upcut end mill · 1/8" 30-degree V-bit · 1/8" O-flute bit · 1/8" ball nose bit · 1/8" compression bit · 1/8" downcut end mill · 1/8" flat end mill · 1/8" upcut end mill · 15.0mm 60-degree V-bit · 15.0mm 90-degree V-bit · 22.0mm surfacing bit · 3/16" O-flute bit · 3/16" compression bit · 3/16" downcut end mill · 3/16" roundover bit · 3/4" ball nose bit · 3/4" roundover bit · 3/8" 30-degree V-bit · 3/8" 60-degree V-bit · 3/8" 90-degree V-bit · 3/8" compression bit · 3/8" downcut end mill · 3/8" keyhole / slot bit · 3/8" roughing end mill · 3/8" roundover bit · 3/8" tapered ball nose bit · 3/8" upcut end mill · 31.8mm dovetail bit · 34.9mm surfacing bit · 4.0mm compression bit · 5.0mm drill bit · 69.8mm surfacing bit · 8.0mm tapered ball nose bit
Showing 300 of 371. Narrow down by bit above.
FAQ
What feeds and speeds for a bit in hardwood on a hobby-ultralight CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00055–0.00271 in per tooth and a feed of 9.7–67.5 IPM (69 sourced rows). Start low and test in scrap.
What feeds and speeds for a bit in hardwood on a hobby-light CNC router?
Published maker data (High Country Tools, Sienci Labs) gives a chip load of 0.00031–0.005 in per tooth and a feed of 22.7–149.6 IPM (95 sourced rows). Start low and test in scrap.
What feeds and speeds for a bit in hardwood on a hobby-rigid CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00123–0.00601 in per tooth and a feed of 32.4–186.1 IPM (69 sourced rows). Start low and test in scrap.
What feeds and speeds for a bit in hardwood on a business CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00172–0.00842 in per tooth and a feed of 45.4–260.6 IPM (69 sourced rows). Start low and test in scrap.
What feeds and speeds for a bit in hardwood on a industrial CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00209–0.01022 in per tooth and a feed of 55.1–316.4 IPM (69 sourced rows). Start low and test in scrap.
Weekly "what changed" email: coming soon
We'll email you when a maker updates their feeds and speeds.