Bits › 1/4" O-flute bit › melamine
1/4" O-flute bit: melamine
Other materials: acrylic · aluminum · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · softwood
Same material, other bits: all melamine settings
| Maker / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools OFS-14U-DLC | hobby-ultralight | 12000 | 27.6 | 0.0023 | source |
| High Country Tools OFL-14U-DLC | hobby-ultralight | 12000 | 27.6 | 0.0023 | source |
| High Country Tools OFS-14U-DLC | hobby-light | 18000 | 64.4 | 0.00358 | source |
| High Country Tools OFL-14U-DLC | hobby-light | 18000 | 64.4 | 0.00358 | source |
| High Country Tools OFS-14U-DLC | hobby-rigid | 18000 | 92 | 0.00511 | source |
| High Country Tools OFL-14U-DLC | hobby-rigid | 18000 | 92 | 0.00511 | source |
| High Country Tools OFS-14U-DLC | business | 18000 | 128.8 | 0.00716 | source |
| High Country Tools OFL-14U-DLC | business | 18000 | 128.8 | 0.00716 | source |
| High Country Tools OFS-14U-DLC | industrial | 18000 | 156.4 | 0.00869 | source |
| High Country Tools OFL-14U-DLC | industrial | 18000 | 156.4 | 0.00869 | source |
FAQ
What feeds and speeds for a 1/4" O-flute bit in melamine on a hobby-ultralight CNC router?
Published maker data (High Country Tools) gives a chip load of 0.0023 in per tooth and a feed of 27.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in melamine on a hobby-light CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00358 in per tooth and a feed of 64.4 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in melamine on a hobby-rigid CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00511 in per tooth and a feed of 92 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in melamine on a business CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00716 in per tooth and a feed of 128.8 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in melamine on a industrial CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00869 in per tooth and a feed of 156.4 IPM (2 sourced rows). Start low and test in scrap.
Weekly "what changed" email: coming soon
We'll email you when a maker updates their feeds and speeds.