Bits › 1/2" compression bit › melamine
1/2" compression bit: melamine
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · plastic · softwood · wood / mdf
Same material, other bits: all melamine settings
| Maker / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools COM-12-DLC | hobby-ultralight | 12000 | 36.2 | 0.00151 | source |
| High Country Tools COM-12L-DLC | hobby-ultralight | 12000 | 36.2 | 0.00151 | source |
| High Country Tools COM-12-DLC | hobby-light | 18000 | 84.4 | 0.00235 | source |
| High Country Tools COM-12L-DLC | hobby-light | 18000 | 84.4 | 0.00235 | source |
| High Country Tools COM-12-DLC | hobby-rigid | 18000 | 120.6 | 0.00335 | source |
| High Country Tools COM-12L-DLC | hobby-rigid | 18000 | 120.6 | 0.00335 | source |
| High Country Tools COM-12-DLC | business | 18000 | 168.9 | 0.00469 | source |
| High Country Tools COM-12L-DLC | business | 18000 | 168.9 | 0.00469 | source |
| High Country Tools COM-12-DLC | industrial | 18000 | 205.1 | 0.0057 | source |
| High Country Tools COM-12L-DLC | industrial | 18000 | 205.1 | 0.0057 | source |
FAQ
What feeds and speeds for a 1/2" compression bit in melamine on a hobby-ultralight CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00151 in per tooth and a feed of 36.2 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/2" compression bit in melamine on a hobby-light CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00235 in per tooth and a feed of 84.4 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/2" compression bit in melamine on a hobby-rigid CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00335 in per tooth and a feed of 120.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/2" compression bit in melamine on a business CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00469 in per tooth and a feed of 168.9 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/2" compression bit in melamine on a industrial CNC router?
Published maker data (High Country Tools) gives a chip load of 0.0057 in per tooth and a feed of 205.1 IPM (2 sourced rows). Start low and test in scrap.
Weekly "what changed" email: coming soon
We'll email you when a maker updates their feeds and speeds.